Differences

This shows you the differences between two versions of the page.

--- public:rangex-pro-manual [2023/12/22 21:32] – laurin
+++ public:rangex-pro-manual [2024/12/09 18:01] (current) – ↷ Page moved from internal:public:rangex-pro-manual to public:rangex-pro-manual admin
@@ Line 69: / Line 69: @@
 {{:public:inav_rx_mapping.png}}
-==== Binding your DJI Goggle ====
-  * Power on your DJI Goggle.
-  * Connect the battery to your BNF model. Only do this with props removed or a smokestopper.
-  * Wait until the Red LED appears on the DJI O3 VTX.
-  * Press the button on your DJI Goggle. It should beep twice every second.
-  * Press the button on the DJI VTX. The goggle confirms the binding by beeping twice.
-{{:public:dji-goggles-2.jpg?400|}}
-{{:public:dji_o3_bind.button.jpeg?400|}}
 ==== Change Flight Modes ====
@@ Line 97: / Line 86: @@
 For all models that support GPS rescue: The GPS rescue should not be activated if you are within 50m of the starting point. If the drone is within 50m radius of the starting point and GPS rescue is activated, the drone will drop form the sky. Only activate GPS Rescue manually if the drone is more than 50m away from its starting point.
+==== Binding your DJI Goggle ====
+  * Power on your DJI Goggle.
+  * Connect the battery to your BNF model. Only do this with props removed or a smokestopper.
+  * Wait until the Red LED appears on the DJI O3 VTX.
+  * Press the button on your DJI Goggle. It should beep twice every second.
+  * Press the button on the DJI VTX. The goggle confirms the binding by beeping twice.
+{{:public:dji-goggles-2.jpg?400|}}
+{{:public:dji_o3_bind.button.jpeg?400|}}
 ==== LED Setup ====