Differences

This shows you the differences between two versions of the page.

--- public:nakedbmpcc4k [2024/05/29 09:51] – laurin
+++ public:nakedbmpcc4k [2024/12/09 18:01] (current) – ↷ Page moved from internal:public:nakedbmpcc4k to public:nakedbmpcc4k admin
@@ Line 33: / Line 33: @@
 Mount the mainboard together with the LED holder onto the bottom CFK plate with 5x M2*6mm. On the other side of the mainboard, use 6x m2*6mm to attach the mainboard with the 3d printed cover and CFK plate.
-{{:public:img_9909.jpg?nolink&400|}}
-{{:public:img_9911.jpg?nolink&400|}}
 ==== Sensor housing ====
+{{:public:bmpcc_manual_sensor_1.jpg?nolink&400|}}
+{{:public:bmpcc_manual_sensor_2.jpg?nolink&400|}}
 The sensor case has to be prepared by inserting 3x m2*8mm press-in nuts (the longer M2 ones in the Kit). These nuts are inserted with the soldering iron (temperature around 220 deg. Celsius).
+{{:public:bmpcc_manual_sensor_9.jpg?nolink&400|}}
+Also add the M3*10mm thread insert on the sides as well as the M3*14mm standoff.
 {{:public:img_9897.jpg?nolink&400|}}
 {{:public:img_9898.jpg?nolink&400|}}
 The front parts of the original Lens mount can be moved 1:1 from the camera to the Nylon printed sensor housing. before mounting those parts, push the CFK plate onto the Nylon printed sensor housing.
-{{:public:img_9895.jpg?nolink&400|}}
+{{:public:bmpcc_manual_sensor_3.jpg?nolink&400|}}
 The sensor can now be pushed on the sensor housing. Using 1x 0.5mm shim should be the optimal shimming distance, but please check that individually for each BMPCC naked build. Mount the sensor with 3x M2*6mm screws.
-{{:public:img_9902.jpg?nolink&400|}}
+{{:public:bmpcc_manual_sensor_4.jpg?nolink&400|}}
+{{:public:bmpcc_manual_sensor_5.jpg?nolink&400|}}
-Cover the sensor by closing the back lid of the sensor housing. The lid is secured by 2x M3*20mm screws.
+Push in 4x M2*22m standoffs into the sensor housing and close the sensor cable hole by pushing the back lid over the standoffs and using by 1x M3*12mm screw from the front to secure it.
-{{:public:img_9904.jpg?nolink&400|}}
+{{:public:img_9906.jpg?nolink&800|}}
-{{:public:img_9906.jpg?nolink&400|}}
-Now screw on the sensor CFK back cover by using the two identical TPU printed standoffs. Inset 2x M2x20mm standoffs beforehand into each TPU part. Also each of these 3d printed parts holds one m3*10mm standoff and secured with a washer and one m3*4mm screw. These standoffs later provide thread for the thumbscrews on the side of each brace to allow fast and easy camera angle changing.
+Now finish the sensor housing assembly by mounting sensor CFK back plate with 4x M2*6mm screws.
 ==== Carbon Cage ====
@@ Line 92: / Line 97: @@
 {{:public:bmpcc_manual_display_10.jpg?&400|}}
-Display section is finished!
-{{:public:bmpcc_manual_display_8.jpg?&800|}}
+Insert the display into the camera and connect to the mainboard. The display is mounted to two M3 standoffs as well as these little 3D printed mounts (check picture) that fit the hinge design. The front one has a little cutout to allow CFast access. Mount these with M3*6mm from below and M3*12mm from the top (through the display mount).
-Insert the display into the camera and connect to the mainboard.
+{{:public:bmpcc_manual_display_11.jpg?&400|}}
+{{:public:bmpcc_manual_display_12.jpg?&400|}}
-{{:public:img_9818.jpg?nolink&400|}}
+Display section is finished!
+{{:public:bmpcc_manual_display_8.jpg?&800|}}
-Congratulations, you have finished building your naked BMPCC 4k!
 ===== Additional Information =====