Differences

This shows you the differences between two versions of the page.

--- public:dji-unlock [2024/12/30 15:24] – admin
+++ public:dji-unlock [2024/12/30 15:30] (current) – admin
@@ Line 1: / Line 1: @@
-====== Bind and Fly (BNF) Manual ======
+====== DJI Unlock Manual ======
 =====General Information=====
@@ Line 10: / Line 10: @@
 In order to have a functional unlock you need to unlock both googles and the air unit. Doing the unlock on only one of these devices doesn't help.
+After a update, you have have to repeat these steps.
 =====Googles=====
@@ Line 17: / Line 19: @@
 ====DJI Google V1====
-Create a .txt file, name it naco_pwr
+  - Create a .txt file, name it naco_pwr
-Type pwr_2 inside the text file
+  - Type pwr_2 inside the text file
-Save and close
+  - Save and close
-Copy naco_pwr.txt to a micro SD card (for your DJI FPV goggles)
+  - Copy naco_pwr.txt to a micro SD card
-Power on Goggles and Air Unit, WAIT until you see image from camera
+  - Power on Goggles and Air Unit, WAIT until you see image from camera
-Then put the SD card in DJI goggles
+  - Then put the SD card in DJI goggles
-Restart Goggles
+  - Restart Goggles
 ====DJI Google V2====
-Create a .txt file, name it naco_pwr
+  - Create a .txt file, name it naco_pwr
-Type pwr_2 inside the text file
+  - Type pwr_2 inside the text file
-Save and close
+  - Save and close
-Copy naco_pwr.txt to a micro SD card (for your DJI FPV goggles)
+  - Copy naco_pwr.txt to a micro SD card
-Power on Goggles and Air Unit, WAIT until you see image from camera
+  - Power on Goggles and Air Unit, WAIT until you see image from camera
-Then put the SD card in DJI goggles
+  - Then put the SD card in DJI goggles
-Restart Goggles
+  - Restart Goggles
 ====DJI Google 2====
+  - Create a empty file, name it ham_cfg_support, save and close
+  - Copy ham_cfg_support to a micro SD card
+  - Then SD card in DJI Google 2
+  - Power on DJI Goggle 2
 ====DJI Google 3====
+  - Create a empty file, name it ham_cfg_support, save and close
+  - Copy ham_cfg_support to a micro SD card
+  - Then SD card in DJI Google 3
+  - Power on DJI Goggle 3
 ====DJI Google Integra====
+  * TODO
@@ Line 49: / Line 62: @@
 ====Air Unit V1====
-Create a .txt file, name it naco_pwr
+  - Create a .txt file, name it naco_pwr
-Type pwr_2 inside the text file
+  - Type pwr_2 inside the text file
-Save and close
+  - Save and close
-Copy naco_pwr.txt to a micro SD card
+  - Copy naco_pwr.txt to a micro SD card
-Then put the SD card in DJI Air Unit V1
+  - Then put the SD card in DJI Air Unit V1
-Power on Air Unit
+  - Power on Air Unit
 ====Vista====
-Create a .txt file, name it naco_pwr
+  - Create a .txt file, name it naco_pwr
-Type pwr_2 inside the text file
+  - Type pwr_2 inside the text file
-Save and close
+  - Save and close
-Power on your Vista
+  - Power on your Vista
-Connect the Vista via USB Cable to a computer
+  - Connect the Vista via USB Cable to a computer
-Wait for the mass storage device to pop up
+  - Wait for the mass storage device to pop up
-Copy naco_pwr.txt to the Vista mass storage
+  - Copy naco_pwr.txt to the Vista mass storage
-Power cycle the Vista
+  - Power cycle the Vista
 ====Air Unit O3====
-Create a empty file, name it ham_cfg_support, save and close
+  - Create a empty file, name it ham_cfg_support, save and close
-Connect the O3 via USB Cable to a computer
+  - Connect the O3 via USB Cable to a computer
-Wait for the mass storage device to pop up
+  - Wait for the mass storage device to pop up
-Copy ham_cfg_support to the O3 mass storage
+  - Copy ham_cfg_support to the O3 mass storage
-Power cycle the O3
+  - Power cycle the O3
 =====Testing the hack=====
-  - Turn on your DJI Goggle
+  - Turn on your google and air unit
-  - Connect the battery to your BNF model. Only do this with props removed or a smokestopper.
+  - Wait for the image from the camera
-  - Wait until the green LED appears on the DJI VTX.
+  - Go into the settings and see if you can change output power / chanels to the FCC ones
-  - Press the red button on your DJI Goggle twice. It should beep twice every second.
-  - Press the button on the DJI VTX. The goggle confirms the binding by beeping twice.