User Tools

Site Tools

Trace:
public:naked-action-4-manual

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
public:naked-action-4-manual [2024/05/31 13:23] – created adminpublic:naked-action-4-manual [2024/12/09 18:01] (current) – ↷ Page moved from internal:public:naked-action-4-manual to public:naked-action-4-manual admin
Line 1: Line 1:
 ====== Naked Action 4 DIY Manual ====== ====== Naked Action 4 DIY Manual ======
  
-{{:public:dji_a4_naked_manual-1.jpg?600|}}+{{:public:dji_a4_naked_manual-1.jpg?nolink&600|}}
  
 ===== General Information ===== ===== General Information =====
Line 24: Line 24:
  
 ===== Preparation ===== ===== Preparation =====
-{{:public:dji_a4_naked_manual-2.jpg?800|}}+{{:public:dji_a4_naked_manual-2.jpg?nolink&800|}}
  
   * Start by adding the battery to the camera and powering it on.   * Start by adding the battery to the camera and powering it on.
Line 34: Line 34:
  
 ==== Step - Remove the Display ==== ==== Step - Remove the Display ====
-{{:public:dji_a4_naked_manual-3.jpg?800|}} +{{:public:dji_a4_naked_manual-3.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-4.jpg?800|}} +{{:public:dji_a4_naked_manual-4.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-5.jpg?800|}}+{{:public:dji_a4_naked_manual-5.jpg?nolink&800|}}
  
   * Remove the battery from the camera.   * Remove the battery from the camera.
Line 43: Line 43:
  
 ==== Step - Remove the Battery Bay ==== ==== Step - Remove the Battery Bay ====
-{{:public:dji_a4_naked_manual-7.jpg?800|}} +{{:public:dji_a4_naked_manual-7.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-8.jpg?800|}} +{{:public:dji_a4_naked_manual-8.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-9.jpg?800|}}+{{:public:dji_a4_naked_manual-9.jpg?nolink&800|}}
  
   * Remove the tape covering the screws in the battery bay. Alternatively, you can poke holes with a screwdriver to access the screws.   * Remove the tape covering the screws in the battery bay. Alternatively, you can poke holes with a screwdriver to access the screws.
Line 52: Line 52:
  
 ==== Step - Disconnect Ribbon Cables ==== ==== Step - Disconnect Ribbon Cables ====
-{{:public:dji_a4_naked_manual-10.jpg?800|}} +{{:public:dji_a4_naked_manual-10.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-11.jpg?800|}}+{{:public:dji_a4_naked_manual-11.jpg?nolink&800|}}
  
   * Remove all flat ribbon cables from the motherboard. These connectors are secured with hot glue.   * Remove all flat ribbon cables from the motherboard. These connectors are secured with hot glue.
Line 60: Line 60:
  
 ==== Step - Remove USB Port and LED ==== ==== Step - Remove USB Port and LED ====
-{{:public:dji_a4_naked_manual-12.jpg?800|}} +{{:public:dji_a4_naked_manual-12.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-13.jpg?800|}} +{{:public:dji_a4_naked_manual-13.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-14.jpg?800|}}+{{:public:dji_a4_naked_manual-14.jpg?nolink&800|}}
  
   * Use a PH0 screwdriver to remove the two screws from the USB port. Lift the USB port with tweezers.   * Use a PH0 screwdriver to remove the two screws from the USB port. Lift the USB port with tweezers.
Line 69: Line 69:
  
 ==== Step - Remove Lens ==== ==== Step - Remove Lens ====
-{{:public:dji_a4_naked_manual-17.jpg?800|}} +{{:public:dji_a4_naked_manual-17.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-19.jpg?800|}} +{{:public:dji_a4_naked_manual-19.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-20.jpg?800|}} +{{:public:dji_a4_naked_manual-20.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-21.jpg?800|}}+{{:public:dji_a4_naked_manual-21.jpg?nolink&800|}}
  
   * Remove the single screw in the top left corner with a PH0 screwdriver. Pull up the heatsink with the LED flex cable.   * Remove the single screw in the top left corner with a PH0 screwdriver. Pull up the heatsink with the LED flex cable.
Line 80: Line 80:
  
 ==== Step - Disassemble Mainboard ==== ==== Step - Disassemble Mainboard ====
-{{:public:dji_a4_naked_manual-22.jpg?800|}} +{{:public:dji_a4_naked_manual-22.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-23.jpg?800|}} +{{:public:dji_a4_naked_manual-23.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-24.jpg?800|}} +{{:public:dji_a4_naked_manual-24.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-25.jpg?800|}}+{{:public:dji_a4_naked_manual-25.jpg?nolink&800|}}
  
   * Remove the top button cable connector with a plastic tool, heating the parts if necessary.   * Remove the top button cable connector with a plastic tool, heating the parts if necessary.
Line 91: Line 91:
  
 ==== Step - Remove the Motherboard Holder ==== ==== Step - Remove the Motherboard Holder ====
-{{:public:dji_a4_naked_manual-26.jpg?800|}} +{{:public:dji_a4_naked_manual-26.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-30.jpg?800|}}+{{:public:dji_a4_naked_manual-30.jpg?nolink&800|}}
  
   * Pry out the motherboard holder using pliers, heating the case to ease removal.   * Pry out the motherboard holder using pliers, heating the case to ease removal.
   * Break off the two noses from the motherboard holder as they are too long for the naked version.   * Break off the two noses from the motherboard holder as they are too long for the naked version.
  
-==== Step - USB-C extension ==== +==== Step - Front Display ==== 
-{{:public:dji_a4_naked_manual-33.jpg?800|}} +{{:public:dji_a4_naked_manual-33.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-35.jpg?800|}} +{{:public:dji_a4_naked_manual-35.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-36.jpg?800|}} +{{:public:dji_a4_naked_manual-36.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-37.jpg?800|}}+{{:public:dji_a4_naked_manual-37.jpg?nolink&800|}}
  
   * Heat the front display and press it out towards the front using the provided 3D-printed square tool.   * Heat the front display and press it out towards the front using the provided 3D-printed square tool.
Line 108: Line 108:
  
 ==== Step - Install Thread Inserts ==== ==== Step - Install Thread Inserts ====
-{{:public:dji_a4_naked_manual-39.jpg?800|}} +{{:public:dji_a4_naked_manual-39.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-40.jpg?800|}} +{{:public:dji_a4_naked_manual-40.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-41.jpg?800|}}+{{:public:dji_a4_naked_manual-41.jpg?nolink&800|}}
  
   * Press the thread inserts into the outer side of the naked case using a clean soldering iron set to 220°C.   * Press the thread inserts into the outer side of the naked case using a clean soldering iron set to 220°C.
Line 116: Line 116:
  
 ==== Step - Install Front Display ==== ==== Step - Install Front Display ====
-{{:public:dji_a4_naked_manual-42.jpg?800|}} +{{:public:dji_a4_naked_manual-42.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-44.jpg?800|}}+{{:public:dji_a4_naked_manual-44.jpg?nolink&800|}}
  
   * Glue the front display in place with 2K epoxy. Wait for the epoxy to cure.   * Glue the front display in place with 2K epoxy. Wait for the epoxy to cure.
  
 ==== Step - Attach ND Filter Adapter ==== ==== Step - Attach ND Filter Adapter ====
-{{:public:dji_a4_naked_manual-65.jpg?800|}}+{{:public:dji_a4_naked_manual-65.jpg?nolink&800|}}
  
-  * Screw the aluminum ND filter adapter to the motherboard holder using the provided 3D-printed tool.+  * Screw the aluminum ND filter adapter to the motherboard holder. 
  
 ==== Step - Assemble Main Components ==== ==== Step - Assemble Main Components ====
-{{:public:dji_a4_naked_manual-46.jpg?800|}} +{{:public:dji_a4_naked_manual-46.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-47.jpg?800|}} +{{:public:dji_a4_naked_manual-47.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-48.jpg?800|}} +{{:public:dji_a4_naked_manual-48.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-49.jpg?800|}} +{{:public:dji_a4_naked_manual-49.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-50.jpg?800|}}+{{:public:dji_a4_naked_manual-50.jpg?nolink&800|}}
  
   * Place the motherboard holder into the naked action 4 front case and secure it with the three silver screws.   * Place the motherboard holder into the naked action 4 front case and secure it with the three silver screws.
Line 140: Line 140:
  
 ==== Step - Connect Cables ==== ==== Step - Connect Cables ====
-{{:public:dji_a4_naked_manual-52.jpg?800|}}+{{:public:dji_a4_naked_manual-52.jpg?nolink&800|}}
  
   * Connect the lens cable and front display cable to the mainboard. Ensure correct alignment before applying force.   * Connect the lens cable and front display cable to the mainboard. Ensure correct alignment before applying force.
Line 146: Line 146:
  
 ==== Step - Install BEC Cable and Cooling Fan ==== ==== Step - Install BEC Cable and Cooling Fan ====
-{{:public:dji_a4_naked_manual-53.jpg?800|}} +{{:public:dji_a4_naked_manual-53.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-54.jpg?800|}} +{{:public:dji_a4_naked_manual-54.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-55.jpg?800|}}+{{:public:dji_a4_naked_manual-55.jpg?nolink&800|}}
  
   * Attach the bracket on top of the lens cable connector with the two screws.   * Attach the bracket on top of the lens cable connector with the two screws.
Line 155: Line 155:
  
 ==== Step - Final Assembly ==== ==== Step - Final Assembly ====
-{{:public:dji_a4_naked_manual-56.jpg?800|}} +{{:public:dji_a4_naked_manual-56.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-57.jpg?800|}} +{{:public:dji_a4_naked_manual-57.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-58.jpg?800|}} +{{:public:dji_a4_naked_manual-58.jpg?nolink&800|}} 
-{{:public:dji_a4_naked_manual-60.jpg?800|}}+{{:public:dji_a4_naked_manual-60.jpg?nolink&800|}}
  
   * Solder the fan's voltage and ground cables to the BEC's pre-tinned 5V and GND pads.   * Solder the fan's voltage and ground cables to the BEC's pre-tinned 5V and GND pads.
public/naked-action-4-manual.1717161809.txt.gz · Last modified: 2024/11/20 17:51 (external edit)
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki