Differences

This shows you the differences between two versions of the page.

--- public:loggermanual [2023/09/07 17:42] – [Firmware Download] admin
+++ public:loggermanual [2024/12/09 18:01] (current) – ↷ Page moved from internal:public:loggermanual to public:loggermanual admin
@@ Line 71: / Line 71: @@
 {{ :public:diff_custom_led_blackbox_firmware_pinio.txt |}}
-Instructions for Firmware Update
+**Instructions for Firmware Update**
-Download the .hex and .txt file that you'll find above to your computer
+  - Download the .hex and .txt file that you'll find above to your computer
-Download and install [[https://github.com/betaflight/betaflight-configurator/releases|Betaflight Configurator]]
+  - Download and install [[https://github.com/betaflight/betaflight-configurator/releases|Betaflight Configurator]]
-Open up the Gyrologger and connect via microUSB cable to computer
+  - Open up the Gyrologger and connect via microUSB cable to computer
-Open Betaflight Configurator and connect to the flight controller by selecting the right COM-Port and clicking on the "Connect" Button
+  - Open Betaflight Configurator and connect to the flight controller by selecting the right COM-Port and clicking on the "Connect" Button
-Click on the "Activate Boot Loader / DFU" Button
+  - Click on the "Activate Boot Loader / DFU" Button
-Click on the "Update Firmware" Button
+  - Click on the "Update Firmware" Button
-Click on the "Load Firmware [Local]" Button and select the downloaded .hex file
+  - Click on the "Load Firmware [Local]" Button and select the downloaded .hex file
-Click on the "Flash Firmware" Button and wait till flashing is finished
+  - Click on the "Flash Firmware" Button and wait till flashing is finished
-Connect to the flight controller by selecting the right COM-Port and clicking on the "Connect" Button
+  - Connect to the flight controller by selecting the right COM-Port and clicking on the "Connect" Button
-Click on the "CLI" Menu in the bottom left corner
+  - Click on the "CLI" Menu in the bottom left corner
-Copy the content of the downloaded .txt file into the command line and hit enter
+  - Copy the content of the downloaded .txt file into the command line and hit enter
-Now type save into the command line and hit enter
+  - Now type save into the command line and hit enter
-Your Gyrologger has been updated
+  - Your Gyrologger has been updated