Differences

This shows you the differences between two versions of the page.

--- public:loggermanual [2023/05/04 15:21] – [LED status indicator] robin
+++ public:loggermanual [2024/12/09 18:01] (current) – ↷ Page moved from internal:public:loggermanual to public:loggermanual admin
@@ Line 15: / Line 15: @@
 ===== LED status indicator =====
-New versions of our logger (start 05.2023) utilize a custom Betaflight Firmware to display the current BlackBox status
+New versions of our logger (start 05.2023) utilize a custom Betaflight Firmware to display the current BlackBox status. The following colors are used for each BlackBox State if you choose ARM State as LED function (default config):
-The following colors are used for each BlackBox State if you choose ARM State as LED function (default config):
   * Running is **green** but can be changed via Betaflight Config
@@ Line 66: / Line 65: @@
   - Press auto sync and the video and log file should be synced
+===== Firmware Download =====
+{{ :public:betaflight_4.4.2_stm32f7x2_gyrologger_pinio_led.hex |}}
+{{ :public:diff_custom_led_blackbox_firmware_pinio.txt |}}
+**Instructions for Firmware Update**
+  - Download the .hex and .txt file that you'll find above to your computer
+  - Download and install [[https://github.com/betaflight/betaflight-configurator/releases|Betaflight Configurator]]
+  - Open up the Gyrologger and connect via microUSB cable to computer
+  - Open Betaflight Configurator and connect to the flight controller by selecting the right COM-Port and clicking on the "Connect" Button
+  - Click on the "Activate Boot Loader / DFU" Button
+  - Click on the "Update Firmware" Button
+  - Click on the "Load Firmware [Local]" Button and select the downloaded .hex file
+  - Click on the "Flash Firmware" Button and wait till flashing is finished
+  - Connect to the flight controller by selecting the right COM-Port and clicking on the "Connect" Button
+  - Click on the "CLI" Menu in the bottom left corner
+  - Copy the content of the downloaded .txt file into the command line and hit enter
+  - Now type save into the command line and hit enter
+  - Your Gyrologger has been updated