Differences

This shows you the differences between two versions of the page.

--- public:loggermanual [2022/10/11 11:21] – laurin
+++ public:loggermanual [2024/12/09 18:01] (current) – ↷ Page moved from internal:public:loggermanual to public:loggermanual admin
@@ Line 7: / Line 7: @@
-  * Input Voltage:		     2-6S
+  * Input Voltage:		     2 - 6S
   * IMU type:			     BMI270
   * Max log frequency:               1.2kHz
@@ Line 13: / Line 13: @@
   * optional external trigger: 	     momentary switch, PWM
   * LED indicator: 		     RGB LED
+===== LED status indicator =====
+New versions of our logger (start 05.2023) utilize a custom Betaflight Firmware to display the current BlackBox status. The following colors are used for each BlackBox State if you choose ARM State as LED function (default config):
+  * Running is **green** but can be changed via Betaflight Config
+  * Disabled, Stopped, Paused, Shutting Down is **red** but can be changed via Betaflight Config*
+  * Prepare Log File, Cache Flush, Start erase is **blue** and can't be changed
+  * Send Sysinfo, Field, GPS and Slow Headers is **yellow** and can't be changed
+  * Erasing and Start Erasing is **orange** and chan't be changed
+*To change these colors head to the Betaflight LED Config and set the colors you want under ARM State called "Armed" and "Disarmed".
@@ Line 23: / Line 35: @@
   * best placement: Behind the lens
-  * Gyroflow IMU orientation: 1
+  * Gyroflow IMU orientation: yXZ
   * Coldshoe mount, SD card pointing forward.
   * Gyroflow IMU orientation: XYZ
-**FULL BMPCC 4k/6k**
+**RED Komodo**
-  * best placement: use ¼” screw on top of the camera, SD card pointing forward.
+  * best placement: Use ¼” screw on top of the camera / smallrig case, SD card pointing forward.
   * Gyroflow IMU orientation:
-**RED Komodo**
-  * best placement: Use ¼” screw on top of the camera / smallrig case, SD card pointing forward.
+**Generic**
-  * Gyroflow IMU orientation:
+  * best placement: use ¼” screw on top of the camera, SD card pointing forward.
+  * Gyroflow IMU orientation: depends on camera model.
 ===== Operation workflow =====
@@ Line 52: / Line 65: @@
   - Press auto sync and the video and log file should be synced
+===== Firmware Download =====
+{{ :public:betaflight_4.4.2_stm32f7x2_gyrologger_pinio_led.hex |}}
+{{ :public:diff_custom_led_blackbox_firmware_pinio.txt |}}
+**Instructions for Firmware Update**
+  - Download the .hex and .txt file that you'll find above to your computer
+  - Download and install [[https://github.com/betaflight/betaflight-configurator/releases|Betaflight Configurator]]
+  - Open up the Gyrologger and connect via microUSB cable to computer
+  - Open Betaflight Configurator and connect to the flight controller by selecting the right COM-Port and clicking on the "Connect" Button
+  - Click on the "Activate Boot Loader / DFU" Button
+  - Click on the "Update Firmware" Button
+  - Click on the "Load Firmware [Local]" Button and select the downloaded .hex file
+  - Click on the "Flash Firmware" Button and wait till flashing is finished
+  - Connect to the flight controller by selecting the right COM-Port and clicking on the "Connect" Button
+  - Click on the "CLI" Menu in the bottom left corner
+  - Copy the content of the downloaded .txt file into the command line and hit enter
+  - Now type save into the command line and hit enter
+  - Your Gyrologger has been updated