Start with the Top Plate, the countersinking facing downward.

Add M3Sx12mm Screws and place the Arms like shown above.

Ad the Middle Plate and tighten the screws.

Install 6mm TPU Spacers with M3Sx15mm screws.

If you use the TBS Lucid Flight Stack, install the Gorilla Mount as shown above. If another Stack is used use M3sx28mm Screws.

Add the TPU VTX Mount for DJI O4 (Pro) or DJI O3 Using M2x5mm Screws.

Push the TPU Pod Mount in place and shove a M3x20mm Standoff in the provided holes as shown above.